China supplier Auto Parts Steering Rack Pinion 3ab423061c 3ab423061A 3ab423061kx for Seat VW worm gearbox

Product Description

Product Description

Auto Parts Steering Rack Pinion 3AB423061C 3AB423061A 3AB423061KX for SEAT VW 

The steering system converts the rotation of the steering wheel into a swivelling movement of the road wheels in such a way that the steering-wheel rim turns a long way to move the road wheels a short way. The system allows a driver to use only light forces to steer a heavy car.
The rack and pinion, also known as the steering rack, is an assembly in your vehicle that allows your wheels to rotate from side to side when you turn your steering wheel.
Steering System is used for all kinds of cars including HONDA, FORD, TOYOTA, NISSAN, HYUNDAI, MITSUBISHI,  ISUZU, VW, MERCEDES-BENZ…

 

 

Product Parameters

OEM NUMBER

SEAT : 3AB423061
SEAT : 3AB423061A
SEAT : 3AB423061AX
SEAT : 3AB423061CX
SEAT : 3AB423061FX
SEAT : 3AB423061G
SEAT : 3AB423061GX
SEAT : 3AB423061H
SEAT : 3AB423061HX
SEAT : 3AB423061J
SEAT : 3AB423061JX
SEAT : 3AB423061K
SEAT : 3AB423061KX
SEAT : 3AB423061X
SEAT : 3C1423050M
SEAT : 3C1423061N
SEAT : 3C1423061NX
SEAT : 3C1423061P
SEAT : 3C1423061R
SEAT : 3C1423061RX
VW : 3AB423061
VW : 3AB423061A
VW : 3AB423061AX
VW : 3AB423061C
VW : 3AB423061CX
VW : 3AB423061F
VW : 3AB423061FX
VW : 3AB423061G
VW : 3AB423061GX
VW : 3AB423061H
VW : 3AB423061HX
VW : 3AB423061J
VW : 3AB423061JX
VW : 3AB423061K
VW : 3AB423061KX
VW : 3AB423061X
VW : 3C1423050F
VW : 3C1423050M
VW : 3C1423061J
VW : 3C1423061JX
VW : 3C1423061K
VW : 3C1423061KX
VW : 3C1423061M
VW : 3C1423061MX
VW : 3C1423061N
VW : 3C1423061NX
VW : 3C1423061P
VW : 3C1423061R
VW : 3C1423061RX

OEM NUMBER
 

SGE0044R
SGERVWP3C1
DSR2131L
DSR2148L
DSR2152L
DSR2384L
717521418
17-1418
SR23359
SGA1254L
06.96.5502
503- 0571 8
54878
SG 0571 8
DE004VW

APPLICATION
 

SEAT  ALHAMBRA (710, 711) 2.0 TDI  2571-2011  CFFA  1968  100  MPV
SEAT  ALHAMBRA (710, 711) 2.0 TDI  2571-2013  CFGB  1968  125  MPV
SEAT  ALHAMBRA (710, 711) 2.0 TDI 4Drive  2016-  DFMA  1968  135  MPV
SEAT  ALHAMBRA (710, 711) 2.0 TDi 4Drive  2018-  DLUB  1968  130  MPV
SEAT  ALHAMBRA (710, 711) 2.0 TDI 4Drive  2015-  CUVC,DFLA,DLTA  1968  110 MPV
SEAT  ALHAMBRA (710, 711) 2.0 TDI 4Drive  2011-2015  CFFB  1968  103  MPV
SEAT  ALHAMBRA (710, 711) 2.0 TSI  2015-  DEDA  1984  162  MPV
SEAT  ALHAMBRA (710, 711) 2.0 TSI  2571-2012  CCZA  1984  147  MPV
SEAT  ALHAMBRA VAN (711) TDI  2015-  CUWA,DFMA  1968  135  Box Body/MPV
SEAT  ALHAMBRA VAN (711) TDI  2015-  CUVC,DFLA  1968  110  Box Body/MPV
SEAT  ALHAMBRA VAN (711) TDI 4Drive  2015-  CUVC  1968  110  Box Body/MPV
SEAT  ALHAMBRA VAN (711) TSi  2015-  CZDA  1395  110  Box Body/MPV
VW   CC B7 (358) 1.4 TSI  2011-2016  CTHD  1390  118  Coupe
VW   CC B7 (358) 1.4 TSI  2015-2016  CZDA  1395  110  Coupe
VW   CC B7 (358) 1.4 TSI MultiFuel  2011-2016  CKMA  1390  118  Coupe
VW   CC B7 (358) 1.8 TSI  2011-2016  CDAA  1798  118  Coupe
VW   CC B7 (358) 1.8 TSI  2011-2016  CDAB  1798  112  Coupe
VW   CC B7 (358) 2.0 TDI  2015-2016  CUWA  1968  135  Coupe
VW   PASSAT ALLTRACK B7 (365) 1.8 TSI  2012-2014  CDAB  1798  112  Estate
VW   PASSAT ALLTRACK B7 (365) 2.0 TDI 4motion  2013-2014  CFGC  1968  130 Estate
VW   PASSAT B6 (3C2) 1.4 TSI  2007-2571  CAXA  1390  90  Saloon
VW   PASSAT B6 (3C2) 1.4 TSI EcoFuel  2009-2571  CDGA  1390  110  Saloon
VW   PASSAT B6 (3C2) 1.6  2005-2571  BSE,BSF  1595  75  Saloon
VW   PASSAT B6 (3C2) 1.6 FSI  2005-2008  BLF  1598  85  Saloon
VW   PASSAT B6 Variant (3C5) 2.0 TFSI  2005-2571  AXX,BPY,BWA,CAWB,CBFA,CCTA,CCZA  1984  147  Estate
VW   PASSAT B6 Variant (3C5) 3.2 FSI Highline 4motion  2005-2571  AXZ  3168  184 Estate
VW   PASSAT B6 Variant (3C5) 3.6 R36 4motion  2007-2571  BWS  3597  220  Estate
VW   PASSAT B7 (362) 1.4 TSI  2012-2014  CTHD  1390  118  Saloon
VW   PASSAT B7 (362) 1.4 TSI  2571-2014  CAXA  1390  90  Saloon
VW   PASSAT B7 Estate Van (365) 1.4 TSi BlueMotion  2571-2014  CAXA  1390  90 Estate Van
VW   PASSAT B7 Estate Van (365) 1.6 TDi BlueMotion  2571-2014  CAYC  1598  77 Estate Van
VW   PASSAT B7 Estate Van (365) 1.8 TFSi  2571-2014  CDAA  1798  118  Estate Van
VW   PASSAT B7 Variant (365) 2.0 TSI Confortline  2571-2015  CCZB  1984  155 Estate
VW   PASSAT B7 Variant (365) 3.6 FSI 4motion  2011-2014  BWS  3597  220  Estate
VW   PASSAT CC B6 (357) 1.4 TSI MultiFuel  2011-2012  CKMA  1390  118  Coupe
VW   PASSAT CC B6 (357) 1.8 TSI  2008-2012  BZB,CDAA  1798  118  Coupe
VW   SHARAN (7N1, 7N2) 2.0 TDI 4motion  2018-  DLUB  1968  130  MPV
VW   SHARAN (7N1, 7N2) 2.0 TFSI  2571-2015  CCZA  1984  147  MPV
VW   SHARAN (7N1, 7N2) 2.0 TSI  2015-  DEDA  1984  162  MPV
VW   SHARAN VAN (7N1, 7N2) 1.4 TSI  2571-2015  CAVA,CTHA  1390  110  Box Body/MPV
VW   SHARAN VAN (7N1, 7N2) 2.0 TDI  2571-2013  CFGB  1968  125  Box Body/MPV
VW   SHARAN VAN (7N1, 7N2) 2.0 TDI  2011-2015  CFFE  1968  85  Box Body/MPV
VW   TOURAN (1T3) 2.0 TDI  2013-2015  CFJB  1968  130  MPV
VW   TOURAN (1T3) 2.0 TDI  2571-2015  CFHC  1968  103  MPV
VW   TOURAN VAN (1T3) 1.2 TSI  2571-2015  CBZB  1197  77  Box Body/MPV
VW   TOURAN VAN (1T3) 1.4 TSI  2571-2015  CAVB,CTHB  1390  125  Box Body/MPV

 

Packaging & Shipping

Company Profile

ZheJiang Mighty Machinery Co. Ltd is a professional manufacturer of auto bearings and car parts for more than 20 years. We provide a one-stop service for our customers. Our main products include wheel bearings & hub assembly, belt tensioners, clutch release bearings, and auto parts.

Relying on the professional and rich manufacturing experience and many substantial factories which stable cooperated for many years, Mighty suppliers customers high-quality products at very competitive prices.

 

Customer’s satisfaction is our First Priority, We adhere to the concept of ” Quality First, Customer First”. We will continue to provide high-quality products and the best services to our customers and build up CHINAMFG long-time friendship partners.

 

Exhibition

 

Our Advantages

More than 20 years of manufacturing and exporting experience
OEM manufacturing available
Full range, large stock
Quickly feedback
One year warranty
One-stop service
On-time delivery

FAQ

1. What’s the minimum order quantity?

We don’t have the minimum order quantity. We can also provide free samples, but you need to pay the freight.

     
 2. Do you provide ODM&OEM order service?

Yes, we provide ODM&OEM services to customers around the world, and we can customize different brands and different sizes of packaging boxes according to customers’ requirements.

     
3. After-sales service and warranty time

We guarantee that our products will be free from defects in materials and workmanship within 12 months from the date of delivery. The warranty is void due to improper use, incorrect installation, and physical damage.
 

4. How to place an order?

Send us an email of the models, brand, quantity, consignee information, model of transportation, and payment
Confirm payment and arrange the production.
 

5. What are your packing conditions?

We use standardized export packaging and environmental protection packaging materials. If you have a legally registered patent, we will package the goods in your brand box after receiving your authorization

6. What are your payment terms?

T/T is 30% of the payment in advance and 70% balance before delivery. Before you pay the balance, we will show you photos or videos of the products and packaging.
 

7. How long is your delivery time?

The delivery time of sample order is 3-5 days, and that of a batch order is 5-45 days. The exact delivery time depends on the item and the quantity you ordered.
 

8. Do you test all products before delivery?
Yes, according to ISO standards, we have professional Q/C personnel, precision testing instruments, and an internal inspection system. We control the quality of every process from material receiving to packaging to ensure that you receive high-quality products
 

9. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: One Year
Warranty: One Year
Type: Steering Gears/Shaft
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic gear rack

How do rack and pinion systems handle different gear ratios?

Rack and pinion systems are capable of accommodating different gear ratios to achieve specific mechanical advantages and motion characteristics. Here’s a detailed explanation of how rack and pinion systems handle different gear ratios:

In a rack and pinion system, the gear ratio is determined by the number of teeth on the pinion gear and the length of the rack. The gear ratio defines the relationship between the rotational motion of the pinion and the linear motion of the rack. Different gear ratios can be achieved through various design considerations:

  • Number of Teeth: The number of teeth on the pinion gear directly affects the gear ratio. A larger number of teeth on the pinion gear compared to the number of rack teeth results in a higher gear ratio, providing increased mechanical advantage and slower linear motion of the rack per revolution of the pinion. Conversely, a smaller number of pinion teeth relative to the rack teeth yields a lower gear ratio, delivering higher linear speed but reduced mechanical advantage.
  • Pitch Diameter: The pitch diameter of the pinion gear, which is the diameter of the imaginary circle formed by the gear teeth, also influences the gear ratio. Increasing the pitch diameter of the pinion relative to the rack diameter leads to a higher gear ratio, while decreasing the pitch diameter results in a lower gear ratio. By adjusting the pitch diameters of the pinion and rack, different gear ratios can be achieved.
  • Module or Diametral Pitch: The module (for metric systems) or diametral pitch (for inch systems) is a parameter that defines the size and spacing of the teeth on the gear. By selecting different module or diametral pitch values, the gear ratio can be adjusted. A larger module or lower diametral pitch leads to a lower gear ratio, while a smaller module or higher diametral pitch results in a higher gear ratio.
  • Multiple Stages: Rack and pinion systems can also incorporate multiple stages of gears to achieve complex gear ratios. By combining multiple pinion gears and racks, each with different tooth counts, gear ratios can be multiplied or divided to achieve the desired overall gear ratio. This approach allows for more flexibility in achieving specific motion requirements and torque transmission characteristics.

When selecting the appropriate gear ratio for a rack and pinion system, several factors should be considered, such as the desired linear speed, torque requirements, precision, and system constraints. Higher gear ratios provide increased mechanical advantage and torque multiplication, which is advantageous for applications requiring heavy loads or precise motion control. Lower gear ratios, on the other hand, offer higher linear speed and reduced mechanical advantage, suitable for applications that prioritize rapid movements.

It’s important to note that changing the gear ratio in a rack and pinion system may impact other performance aspects, such as backlash, load distribution, and system efficiency. Proper design considerations, tooth profile selection, and material choices should be made to ensure optimal performance and reliability while maintaining the desired gear ratio.

plastic gear rack

How do rack and pinion systems contribute to efficient power transmission?

Rack and pinion systems play a significant role in facilitating efficient power transmission in various mechanical applications. Here’s a detailed explanation of how rack and pinion systems contribute to efficient power transmission:

Rack and pinion systems offer several advantages that contribute to efficient power transmission:

  • Direct Power Transfer: Rack and pinion systems provide a direct and efficient means of power transmission. The teeth of the pinion gear mesh with the teeth of the rack, creating a positive engagement. This direct contact allows for minimal power loss during transmission, as there are no intermediate mechanisms or components to introduce friction or slip.
  • High Mechanical Efficiency: Rack and pinion systems are designed to have high mechanical efficiency, meaning they maximize the output power compared to the input power. The teeth of the pinion and the rack are carefully designed and machined to minimize friction and ensure smooth motion. This efficient transfer of power reduces energy waste and enhances overall system performance.
  • Low Backlash: Backlash refers to the play or clearance between the teeth of the pinion and the rack. Rack and pinion systems can be designed with minimal backlash, which contributes to efficient power transmission. Low backlash ensures precise and immediate response to input motion, minimizing energy losses associated with tooth clearance and backlash compensation.
  • Efficient Torque Transmission: Rack and pinion systems are capable of transmitting high torque efficiently. The engagement of the pinion teeth with the rack teeth distributes the applied torque evenly along the contact area, resulting in efficient torque transmission without slippage or power dissipation. This characteristic makes rack and pinion systems suitable for applications that require high torque output.
  • Compact Design: Rack and pinion systems offer a compact design compared to other power transmission mechanisms. The linear nature of the rack allows for a more straightforward integration into space-limited applications. This compact design minimizes energy losses due to unnecessary mechanical components or complex transmission paths, resulting in more efficient power transmission.
  • High-Speed Capability: Rack and pinion systems are capable of efficient power transmission at high speeds. The direct contact between the teeth of the pinion and the rack enables rapid and precise motion transfer without significant energy losses. This characteristic is advantageous in applications that require quick and accurate movements.

By combining features such as direct power transfer, high mechanical efficiency, low backlash, efficient torque transmission, compact design, and high-speed capability, rack and pinion systems contribute to efficient power transmission in a wide range of applications. These systems are commonly used in industries such as automotive, robotics, machinery, and aerospace, where efficient power transfer is crucial for optimal performance and energy savings.

plastic gear rack

What advantages do rack and pinion systems offer for precise motion control?

Rack and pinion systems offer several advantages for precise motion control. Here’s a detailed explanation of the advantages:

  • Precision: Rack and pinion systems provide high precision in motion control. The teeth on the rack and pinion gears mesh closely, resulting in minimal backlash or play. This close engagement allows for accurate and repeatable linear motion, making rack and pinion systems suitable for applications that require precise positioning and movement control.
  • Direct Mechanical Linkage: Rack and pinion systems offer a direct mechanical linkage between the rotating pinion gear and the linearly moving rack. This direct linkage ensures a one-to-one correspondence between the rotational motion of the pinion gear and the linear motion of the rack. The absence of intermediate linkages or mechanisms reduces the chances of mechanical play or lost motion, contributing to the overall precision of the system.
  • Low Backlash: Backlash refers to the amount of clearance or play between mating teeth in a gear system. Rack and pinion systems can be designed to have low backlash, which is crucial for precise motion control. The minimal backlash in rack and pinion systems allows for accurate and immediate response to changes in input, ensuring precise positioning and minimizing errors in motion control applications.
  • High Repeatability: Rack and pinion systems offer high repeatability in motion control. Once the gear teeth are engaged, the linear motion of the rack follows the rotational motion of the pinion gear consistently. This repeatability allows for precise and consistent positioning of the rack, making rack and pinion systems suitable for tasks that require repeated and accurate movements.
  • Efficient Power Transmission: Rack and pinion systems provide efficient power transmission from the rotating pinion gear to the linearly moving rack. The direct mechanical linkage and the close meshing of teeth minimize energy losses, ensuring that a significant portion of the input power is efficiently converted into linear motion. This efficiency is beneficial in applications where energy conservation is important.
  • Fast Response: Rack and pinion systems offer fast response in motion control. The teeth on the rack and pinion gears allow for rapid acceleration and deceleration, enabling quick and responsive movements. This fast response time is valuable in applications that require dynamic motion control or rapid changes in position.
  • Compact Design: Rack and pinion systems have a compact design, which is advantageous in applications with limited space. The linear nature of the rack allows for efficient packaging, making rack and pinion systems suitable for compact machinery and equipment.

Overall, rack and pinion systems provide high precision, low backlash, efficient power transmission, and fast response, making them well-suited for applications that require precise motion control. These advantages make rack and pinion systems popular in industries such as automotive, robotics, machinery, automation, and more.

China supplier Auto Parts Steering Rack Pinion 3ab423061c 3ab423061A 3ab423061kx for Seat VW worm gearboxChina supplier Auto Parts Steering Rack Pinion 3ab423061c 3ab423061A 3ab423061kx for Seat VW worm gearbox
editor by Dream 2024-04-24

Tags:

rack pinions

As one of leading rack pinions manufacturers, suppliers and exporters of mechanical products, We offer rack pinions and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of rack pinions

Recent Posts